Ultimate Guide to CSS Gradients

Gradients are back.

They are bold, eye-catching, and playful. When used correctly they can breathe life into a drab and lifeless design.

In this article, I’ll show you how to create gradients in CSS, so you can make your websites stand out.

What this article is about

This article aims to explain both the syntax and concepts behind CSS gradients. Topics covered include:

  • Linear & Radial gradient syntax
  • What are color stops
  • Setting the direction of linear gradients
  • How CSS angles work
  • Changing the size, shape & position of radial gradients

But first, let’s get one thing out of the way…

Gradients are Images in CSS

For this reason, we need to set gradients as a background-image. You might think it’s obvious, but I had trouble remembering that at first.

I used to try and set gradients using background-color all the time. If you have trouble remembering this like me, use the background shorthand.

It lets us use the same property for colors and images. Including gradients.

Linear Gradients

A linear gradient is made up of two basic components: direction and color-stops.

Color Stops

Color stops define which colors make up the gradient and optionally, where to put them.

We can add as many color stops as we want. By default, they’ll be spaced evenly along the gradient line.

Color stops also allow us to set the starting position of each color manually. We do so by adding a percentage (with 0% being the start of the gradient and 100% its end ) after the color.

We can also set an ending position for a color, if we want a color to take up more space.

Here are a few examples of manually positioned color stops:

3 gradients with 3 color-stops. Each with different color-stop positions.

Direction

By default, a gradient goes from top to bottom.

To get a gradient going from one side to the opposite side, write to *, where * is one of four keywords: top, bottom, left, and right.

For example: to left gives us a right-to-left gradient.

By using two keywords, we get a gradient going from one corner to the opposite corner.

For example: to bottom right gives us a gradient going from the top-left to the bottom-right corner.

If you need more precision than side-to-side or corner-to-corner, you can specify a custom angle.

CSS Angles

There are four different angle units in CSS, but we’re only going to focus on two: degrees deg and turns turn.

Degrees — a value from 0deg to 360deg, where 0deg = to top, 90deg = to right, etc.

Turns are exactly what they sound like: 360 degree turns. This means that: 0.5turn = 180deg, 0.25turn = 90deg, etc.

There’s one thing you need to remember. CSS angles work differently than the ones you remember from school. They resemble a clock. Starting at the top and going clockwise.

The gradient’s direction is indicated by the spinning arm. The corresponding angle in degrees is shown in the center.

Negative Angles

An angle can also be a negative number, like: -90deg or -0.25turn. Negative values represent counter-clockwise angles. So for example -45deg is the same as 315deg.

Radial Gradients

Radial gradients are different from linear gradients in one important way. Instead of progressing in a straight line, the colors radiate outwards from a single point.

The area of a radial gradient is defined by the origin point’s position, the ending shape, and its size.

The final area of a default radial gradient with 2 color stops: white and #F0626C

Let’s look at these three components in more detail.

Position

By default, the origin point is in the center of the element. We can change that by writing at *, where * is one or two length or percentage values indicating the origin point's coordinates.

Setting the origin’s position works exactly like the background-position property. You can read more about it in the article below.

Shape

By default, the gradient spans the entire area of the element. This means that if the element is not a square, the gradient will stretch and become an ellipse.

If we want the gradient to stay a circle — regardless of the container’s proportions — we need to set the gradient’s shape to circle.

color-stop positions are adjusted in this example to better illustrate the differences

Size

The ending shape’s size is defined by where its edge meets the element.

Which part of the element? That can be set with one of four keywords: closest-side, closest-corner, farthest-side, and farthest-corner.

You can see all size & shape combinations below. The gradient area is marked using light ellipses and circles, and the 0% and 100% points are marked with a dark arrow.

Even though farthest-corner and closest-corner might look identical, they produce very different results when the origin position is not in the center.

We can also specify an absolute value for the ending shape’s size, using a length value (radius) in case of circles and two percentages (horizontal and vertical radius) in case of an ellipse.

Putting it all together

We can combine changing the shape, size, and position. All three values make up the first parameter of radial-gradient(). That's why we only put one comma after them.

All three values are optional and default to: ellipse farthest-corner at center center.

Here are a few examples, for you to get used to the syntax:

This should be enough to craft almost any gradient you want.

A few more advanced bits of info as well as conic and repeating gradients will be discussed in part 2. Follow me on Twitter to be notified when it’s released.

Thanks for reading. I hope you learned something useful. If you have any questions, ask in the comments. Follow me for more web development tips.

Click them, don’t be shy 👆

You might also like:

--

--

--

I write about web development tips & news. Follow me on twitter for more: twitter.com/HadrysMateusz

Love podcasts or audiobooks? Learn on the go with our new app.

Recommended from Medium

Kubernetes for dummies: Deployment auto-scaling

First Step To Docker

Building a PiHole for Privacy and Performance

The Story: Speaking Other Language

Modulus of a Negative Number

TRY HACK ME: Write-Up Squid Game-Attacker1

Here’s a List of 5 Coding Principles That Help You Write Better Code

Synapse Data Exfiltration Protection — Block traffic to other Subscriptions

Architecture that shows blocked traffic to a certain subscription

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Mateusz Hadryś

Mateusz Hadryś

I write about web development tips & news. Follow me on twitter for more: twitter.com/HadrysMateusz

More from Medium

Customizing Bootstrap 5 with SASS

Recreating Dribbble’s Page Layout with HTML + CSS

Dribbble’s Landing Page

How to synchronize the color contrast between the background and the text with javascript?

The default look of the selected filters

CSS Box Model Explained

CSS Box model,Padding ,Margin,Borders,Content